saw bandpass filter F1G26 part no. F1G26 rev. date 2013-05-20 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. nwoe02-as01 1/7 4 5 6 1 23 1 23 65 4 features rf bandpass filter no impedance matching require for operation at 50 ceramic surface mounted device package ( 3.0 mm * 3. 0 mm ) single-ended operation rohs compliant package dimensions dimensions shown are nominal in millimeters body : al 2 o 3 ceramic lid : kovar, ni plated terminations : au plating 0.3 ~ 1.0 um, over a 1.27 ~ 8.89 um ni plating maximum ratings parameters unit minimum typical maximum operating temperature range -40 25 85 storage temperature range -45 25 85 power handling capability dbm - - 15 electrostatics sensitive device ( esd ) pin configurations 2 input 5 output 1, 3, 4, 6 case ground i 1g26
saw bandpass filter F1G26 part no. F1G26 rev. date 2013-05-20 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. nwoe02-as01 2/7 specifications fc = 1258 mhz notes : 1) all specifications are based on the matching s chematic shown below, measured by agilent network a nalyzer and full 2 port calibration. 2) electrical margin has been built into the design to account for the variations due to temperature d rift and manufacturing tolerances 3) all attenuation measurements are measured relati ve to insertion loss minimum typical maximum unit center frequency ( fc ) - 1258 - mhz insertion loss ( 1248 ~ 1268 mhz ) - 2.4 3.5 db amplitude ripple ( 1248 ~ 1268 mhz ) - 0.4 1.0 db p-p absolute group delay ( 1248 ~ 1268 mhz ) - 6 30 ns attenuation 0.3 ~ 960 mhz 1050 ~ 1120 mhz 1390 ~ 1400 mhz 1700 ~ 2500 mhz 2500 ~ 3000 mhz 45 40 40 30 20 50 46 47 39 29 - - - - - db input/output impedance 50 ohms
saw bandpass filter F1G26 part no. F1G26 rev. date 2013-05-20 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. nwoe02-as01 3/7 input 50 output 50 matching schematic ( actual matching values may vary due to pcb layout a nd parasitics ) marking configuration 1) i 2) 1g26 3) 1) pad number 1 index 2) manufacturer name 3) marking number * ink or laser marking available
saw bandpass filter F1G26 part no. F1G26 rev. date 2013-05-20 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. nwoe02-as01 4/7 typical performance ( at 25 )
saw bandpass filter F1G26 part no. F1G26 rev. date 2013-05-20 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. nwoe02-as01 5/7 input / output vswr charts input / output smith charts
saw bandpass filter F1G26 part no. F1G26 rev. date 2013-05-20 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. nwoe02-as01 6/7 packing specifications 1. reeling quantity : 3000 pcs / 13 reel ( or 1000 pcs / 7 reel ) 2. taping structure : the tape shall be wound around t he reel in the direction shown below. tape specification 1. leader part and vacant position specification 2. tensile strength of carrier tape 4.4n/mm width 3. top cover tape adhesion 1) pull off angle : 0~15 2) speed : 300mm/min 3) force : 20~70g reel reel reel reel top cover tape top cover tape top cover tape top cover tape carrier tape carrier tape carrier tape carrier tape end end end end start start start start tape running direction vacant 150mm min. component contained vacant 150mm min. leader part 250mm min. 0~15 degree top cover tape direction of pull carrier tape
saw bandpass filter F1G26 part no. F1G26 rev. date 2013-05-20 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. nwoe02-as01 7/7 carrier tape dimensions [unit : mm] part direction reel dimensions [unit : mm] a 3.40 0.1 b 3.40 0.1 c 7.25 0.1 d 1.70 0.1 e 12.00 0.1 f 8.00 0.1 tape running direction
|
